Wells tapping ground water resources can provide drinking water of the highest quality.  Owning a private household-supply water well allows homeowners to control their own water supply.

Ownership also comes with the responsibility of keeping the water well in good working order.

Why Is a Checkup Important?

The National Ground Water Association recommends routine annual maintenance checks to ensure the proper operation of the well and prolong its years of service, as well as monitor the water quality.

What Does a Checkup Involve?

A licensed and/or certified water well contractor should conduct your routine well checkup.

Your checkup should include:

·     A flow test to determine system output, along with a check of the water level before and during pumping (if possible), pump motor performance (check amp load, grounding, and line voltage), pressure tank and pressure switch contact, and general water quality (odor, cloudiness, etc.)

·  An inspection of well equipment to assure that it is sanitary and meets local code requirements.

·     A test of your water for coliform bacteria and nitrates, and anything else of local concern.

Other typical additional tests are those in iron, manganese, water hardness, sulfides, and other water constituents that cause problems with plumbing, staining, water appearance, and odor.  Changes in these constituents also may indicate changes in your well or local ground water.  Additional tests may be recommended if water appears cloudy or oily, if bacterial growth is visible on fixtures or water treatment devices are not working as they should. 

Check with your water well contractor, or department of natural resources, or local health department for information on local water quality issues.

·     A concise, clear, written report should be delivered to your following the checkup that explains results and recommendations, and includes all laboratory and other test results.

Other steps to maintain your water well:

·     Keep hazardous chemicals, such as paint, fertilizer, pesticides, and motor oil far away from your well, and maintain a "clean" zone of at least 100 feet between your well and any kennels or livestock operations.  Also, always maintain proper separation between your well and buildings, waste systems, or chemical storage areas.  Your registered contractor is familiar with the applicable local codes.

·     Periodically check the well cover or well cap on top of the casing (well) to ensure it is in good repair and securely attached.  Its seal should keep out insects and rodents.

·     Keep your well records in a safe place.  These include the construction report, and annual water well system maintenance and water testing results.

Get your water tested anytime there is a change in taste, odor or appearance, or anytime the system is serviced.